LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1993 >> Wrangler Base, 2.5 P >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crankshaft Position Sensor >> Removal (5.2L)

Removal (5.2L)

  1. Remove spark plug cable loom and spark plug wires from mounting stud on rear of right valve cover. Remove right exhaust manifold heat shield. Disconnect hoses from EGR valve. Disconnect connector and hoses at EGR transducer.
  2. Remove EGR valve. Disconnect connector at Oil Pressure Sending (OPS) unit. Using appropriate socket, remove OPS unit. Remove EGR tube. Disconnect crankshaft connector from harness connector. Remove crankshaft position sensor.
scientia non olet · About LEMON Manuals