LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1993 >> Wrangler Base, 2.5 P >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Removal & Installation (Cherokee)

Removal & Installation (Cherokee)

  1. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Remove fuel tank filler cap. Drain fuel tank until fuel level is below 1/4 full. Raise and support vehicle. Disconnect fuel gauge sending unit connector.
  2. Disconnect fuel tank vent hose and return hoses from fuel pump/fuel gauge sending unit. Using drift punch and hammer, carefully remove fuel pump lock ring counterclockwise. Remove fuel pump/fuel gauge sending unit and "O" ring. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals