LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1993 >> Wrangler Base, 2.5 P >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Testing >> Intermittent Wiper Module Test

Intermittent Wiper Module Test

NOTE: DO NOT  move switch to intermittent mode during following test. Damage to switch rheostat will result.
  1. Test operation of all wiper functions. If any malfunction is found, remove intermittent wiper module. Connect harness connectors together. This will remove intermittent feature from system, for test purposes. Turn ignition switch to ACCY position.
  2. Move wiper switch through all positions EXCEPT intermittent. If wiper system functions normally, replace intermittent wiper module. Retest wiper system. If wiper system does not function properly, see FRONT WIPER MOTOR TEST  and/or FRONT WIPER SWITCH TEST  .
scientia non olet · About LEMON Manuals