Ignition System: Distributor: Removal
WARNING: This page is about a different car, the 1994 Plymouth Voyager, 1994 Plymouth Grand Voyager, 1994 Dodge Grand Caravan, and 1994 Dodge Caravan. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect distributor pick-up connector from wiring harness connector. Remove splash shield (if equipped). Remove distributor cap. Rotate engine crankshaft until distributor rotor is pointing toward cylinder No. 1 of distributor cap.
- To indicate rotor and distributor housing position when reinstalling distributor, scribe mark on distributor or adjacent component as reference. Remove distributor hold-down nut. Carefully lift distributor from engine.