LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1993 >> Cherokee Country, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Cooling Fan >> Component Testing >> Relay

Component Testing: Relay

  1. Remove relay from Power Distribution Center (PDC). Connect a self-powered test light between relay terminals No. 2 and 4. See Fig 1 . Test light should indicate no continuity. Leave test light connected.
  2. Using a jumper wire, connect relay terminal No. 5 to a good ground. Using another jumper with a 15-amp in-line fuse, supply battery power to relay terminal No. 1. If test light does not indicate continuity, replace relay.
    Fig 1: Identifying Fan Relay Connector Terminals
    G93A75911Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals