Neutral Safety Switch
NOTE:
Neutral safety switch may be referred to as park/neutral or gear select switch. For proper neutral safety switch adjustment, see NEUTRAL SAFETY SWITCH
under REMOVAL & INSTALLATION.
Disconnect electrical connector. Note terminal identification. See Fig 1 . Using ohmmeter, check continuity between specified terminals. See NEUTRAL SAFETY SWITCH CONTINUITY SPECIFICATIONS table. Replace neutral safety switch if continuity is not as specified.
NEUTRAL SAFETY SWITCH CONTINUITY SPECIFICATIONS
| Shift Lever Position | Continuity Between Terminals | ||
|---|---|---|---|
| Park | "B" & "C" | ||
| Reverse | "A" & "E" | ||
| Neutral | "B" & "C" | ||
| Drive | (1) | ||
| 3 | "A" & "G" | ||
| 1-2 | "A" & "H" | ||
|
|||