LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Wrangler Laredo, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Coolant Temperature Sensor (Cts) R & I >> Procedure >> Installation

Coolant Temperature Sensor (Cts) R & I: Procedure: Installation

  1. Install the CTS to the cylinder block. Tighten the CTS to 21 Ft. Lbs. (28 Nm).
  2. Connect the CTS wire connector.
  3. Install air cleaner assembly.
  4. Fill the cooling system.
scientia non olet · About LEMON Manuals