LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Wrangler Base, 4.2 T, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Carburetor (5.9L) R & I >> Installation

Carburetor (5.9L) R & I: Installation

  1. Clean gasket mating surfaces. Install replacement gaskets and spacer. Position carburetor on spacer and gasket. Install carburetor mounting nuts and tighten, in a crisscross pattern, to 84 INCH lbs. (9 N.m). Tighten nuts in this pattern further to 16 ft. lbs. (22 N.m).
  2. Reconnect all hoses, lines, springs, and electrical connectors to carburetor. Adjust engine idle speed and idle mixture, if necessary. See the ADJUSTMENTS article. Install air cleaner.
scientia non olet · About LEMON Manuals