Cruise Control Switch

Cruise control switch is an integral part of turn signal switch lever and consists of 2 separate switches. An ON-OFF and RESUME slide switch is located on flat part of directional switch lever.

A SET/COAST push button switch is located at end of directional switch lever. To engage system, move slide switch to ON position and accelerate to desired speed. Depress and release SET/COAST button on end of switch lever. System will maintain selected speed.

System will automatically disengage when brake or clutch pedal is depressed. It can be re-engaged to previously selected speed by accelerating to 30 MPH and moving slide switch to RESUME position and release.

NOTE: When slide switch is moved to OFF position, preset speed of RESUME function is canceled from memory and must be reset when system is reactivated.

Higher speed can be set by pressing on accelerator pedal until new speed is reached and then pushing SET/COAST button. Lower speed can be obtained by lightly depressing brake pedal, allowing the vehicle to slow to desired speed and then depressing and releasing SET/COAST button.