LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Grand Wagoneer >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Control Switch & Motor Test

Control Switch & Motor Test

  1. Connect test light between Yellow wire and Orange wire terminals. Operate control switch up and down on window being tested. If light illuminates in UP and DOWN positions, switch, Yellow and Orange wires are okay.
  2. Disconnect Green and White motor leads at terminal plate and connect to Green and White leads of switch. Operate master switch. If window operates, motor is okay but switch is defective. If motor does not operate, remove door trim panel and check connections and leads to motor. If motor operates, switch is defective.
scientia non olet · About LEMON Manuals