LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Cherokee Laredo, 2D Utility, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Engine Speed (Crankshaft Position) Sensor R & I >> Procedure >> Installation

Engine Speed (Crankshaft Position) Sensor R & I: Procedure: Installation

  1. Install the engine speed sensor to the transmission housing with 2 shoulder bolts. Tighten the engine speed sensor shoulder bolts.
  2. Connect the engine speed sensor wire connector.
scientia non olet · About LEMON Manuals