LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Cherokee Laredo, 2D Utility, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Alignment Procedures >> Toe Adjustment >> Cherokee, Comanche & Wagoneer

Cherokee, Comanche & Wagoneer

  1. Set front wheels straight-ahead. Measure toe and compare to specifications. See ALIGNMENT SPECIFICATIONS .
  2. Center steering wheel by counting the turns required to hit left and right steering stops. Center steering wheel mid-way between stops. Loosen drag link adjustment sleeve clamp bolts. See Fig 1. Rotate sleeve with appropriate tool to adjust right wheel toe to specification. Position clamp bolts so threaded bolt ends face upward and to rear of vehicle. Tighten drag link sleeve bolts to specification. See TORQUE SPECIFICATIONS .
  3. Loosen clamp bolts at each end of tie rod. Rotate tie rod with appropriate tool to adjust left wheel to toe specification. See ALIGNMENT SPECIFICATIONS . When adjustment is complete, position sleeve as described earlier and tighten to specifications. See TORQUE SPECIFICATIONS .
Fig 1: Exploded View of Steering Linkage (Cherokee, Comanche & Wagoneer)
G90E04496Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals