Cruise Control System Test 5

TEST 5 - LAMP NO. 4 WILL NOT LIGHT: IGNITION IN RUN

Conditions

Specification

If Incorrect, Perform:

GAUGES fuse (60/70 Series)

Not blown

Replace fuse

ACCY fuse (Model 81)

Not blown

Replace fuse

Across 2 & 11 ⁽¹⁾

240-4K ohms

Go to next step

Across G & F ⁽²⁾

280-430 ohms ⁽³⁾

Replace module

⁽¹⁾	Module connector terminal(s), while moving throttle from idle to wide open throttle (WOT).

⁽²⁾	Cruise control connector terminal(s), while moving throttle from idle to wide open throttle (WOT).

⁽³⁾	280-430 ohms at idle, 4K ohms at wide open; if both tests OK, repair open to control module.