LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1989 >> Cherokee Limited, 2D Utility >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Grand WAGONEER >> Switch Up Test

Switch Up Test

  1. Connect a jumper wire between Red lead and "Up" terminal. See Figure. Connect another jumper wire between ground terminal of switch and "Down" terminal of switch. See Figure.
  2. If motor operates, test shows voltage is reaching motor. Install switch body back on multiple connector and actuate switch. If motor does not operate, replace switch body. Test each switch in same manner. If motor does not operate after installing new switch, go to MOTOR TEST .
scientia non olet · About LEMON Manuals