LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1989 >> Cherokee Base, 2D Utility, 4.0 L, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> EGR System >> Vacuum Transducer Test >> 2.5L & 4.0L Only

2.5L & 4.0L Only

  1. Disconnect transducer vacuum lines and (if applicable) backpressure line. Remove transducer.
  2. Plug transducer output port and apply 1-2 psi of regulated compressed air pressure to transducer backpressure port. See Figure . Apply a minimum of 12 in. Hg to transducer input port. Vacuum should hold. If not, replace vacuum transducer.
scientia non olet · About LEMON Manuals