LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1988 >> Comanche Eliminator, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - TBI >> Removal & Installation >> Throttle Body Assembly >> Removal

Throttle Body Assembly: Removal

  1. Remove air inlet duct and adapter plate. Remove throttle cable and return spring. Disconnect electrical leads from fuel injector, WOT switch, and ISA motor.
  2. Disconnect fuel supply and return lines at throttle body. See Figure . Tag and disconnect vacuum hoses. Disconnect TPS wiring. Remove throttle body assembly. If throttle body assembly is being replaced, transfer ISA motor and WOT switch bracket assembly to new unit.
scientia non olet · About LEMON Manuals