LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1987 >> Pickup J20 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Turning Angle Adjustment

Turning Angle Adjustment

  1. The turning angle stop screws are located on back side of steering knuckle, just above axle centerline. To adjust, loosen lock nut on stop screw.
  2. Using full-floating turn table under each wheel, adjust stop screw IN to increase turning angle and OUT to decrease turning angle. Tighten lock nut.
TURNING ANGLE ADJUSTMENT

Application Left Wheel Right Wheel
Grand Wagoneer & Trucks 36-37° 36-37°
scientia non olet · About LEMON Manuals