LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1987 >> Cherokee Limited >> Repair and Diagnosis >> Transmission >> Clutches >> Overhaul >> Hydraulic System Bleeding

Hydraulic System Bleeding

  1. Fill master cylinder reservoir with DOT 3 brake fluid. On all models, compress slave cylinder plunger by pushing release lever as far forward as possible.
  2. Attach rubber hose to slave cylinder bleeder screw. Immerse other end of hose in glass container 1/2 full of brake fluid. Loosen bleeder screw and have an assistant depress clutch pedal. Tighten bleeder screw and release pedal.
  3. Repeat bleeding procedure until fluid entering container is free of bubbles. DO NOT  allow reservoir to run out of fluid during bleeding. Refill clutch master cylinder to level mark on reservoir.
scientia non olet · About LEMON Manuals