LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1987 >> Cherokee Base, 2D Utility, 2.1 B >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starter - BOSCH >> Testing (On-Vehicle) >> Solenoid Test

Solenoid Test

  1. Connect a heavy jumper wire on starter relay between battery and solenoid terminals. If engine cranks, solenoid is okay. Go to RELAY TEST. If not, go to next step.
  2. Check wiring and connections from relay to starter. Repair or replace as necessary. If engine still fails to crank, starter is defective.
scientia non olet · About LEMON Manuals