LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1986 >> Wagoneer Base, 2.5 H, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Turbocharger - Diesel >> Testing >> Turbocharger WASTEGATE

Turbocharger WASTEGATE

  1. Install a dial indicator on upper portion of wastegate lever arm. Connect Pressure Tester (MS 554-03) and Gauge (Mot. 867) at pressure regulator inlet. See Figure .
  2. At standing position, zero dial indicator. Using pressure tester, force air into pressure regulator until dial indicator reaches .015" (.38 mm). Pressure reading should be between 10.7-11.6 psi (.75-.82 kg/cm2 ).
scientia non olet · About LEMON Manuals