LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1986 >> Comanche Custom, 2.5 H, RWD, Standard, AX5 >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - TBI >> Removal & Installation >> Throttle Body Assembly >> Removal

Throttle Body Assembly: Removal

  1. Remove air cleaner elbow and adaptor plate. Disconnect throttle return spring, throttle cable and cruise control cable (if equipped). Disconnect wiring connectors from fuel injector and ISA motor. Disconnect fuel supply and return pipes at throttle body. See Figure .
  2. Tag all vacuum hoses for installation. Disconnect vacuum hoses. Remove throttle body from manifold. If throttle body assembly is being replaced, transfer ISA motor and bracket assembly to new part.
scientia non olet · About LEMON Manuals