LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1986 >> Comanche Base, 2.1 B, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Steering >> Steering Linkage >> Steering Linkage >> Service Procedures >> Connecting Rod Replacement

Connecting Rod Replacement

  1. Remove cotter pins and nuts from both ends of connecting rod, then remove rod. When installing, ensure wheels are in straight-ahead position and steering arm is parallel to center line of vehicle.
  2. Ensure steering gear arm is properly indexed. Align marks on steering arm and gear shaft at center of high point. Install connecting rod.
scientia non olet · About LEMON Manuals