LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1985 >> Scrambler Base, 4.2 C, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Columns >> Removal & Installation >> All Models >> Installation

All Models: Installation

  1. Position steering column in vehicle. Connect upper steering shaft to intermediate shaft "U" joint. Install and tighten "U" joint pinch bolt.
  2. On models with cruise control, connect electrical connector. Connect ignition switch connectors, connecting White connector first. Install upper and lower toe plates. Install bolts but do not tighten.
  3. Install mounting bracket on steering column. Align column with instrument panel. Install bracket to instrument panel bolts but do not tighten.
  4. Pull upward on column and tighten bolts. Ensure bolts are tightened while pulling upward on column. Tighten toe plate bolts.
  5. Install both halves of instrument panel bezel. Install left A/C duct extension (if removed). Connect shift rod to shift lever.
  6. Connect battery negative cable. Check A/T shift linkage operation and adjust as necessary. Check for correct operation of all electrical components.
scientia non olet · About LEMON Manuals