LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1981 >> Cherokee Base, 2D Utility, 5.9L Eng VIN N, 4WD, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Control Switch & Motor Circuits

Control Switch & Motor Circuits

  1. Connect test lamp between terminals of "ORANGE" and "YELLOW" wire. Operate control switch "UP" and "DOWN".
  2. If lamp lights in both positions, wires and door switch are not defective. Disconnect "WHITE" and "GREEN" motor leads at terminal plate and connect to "GREEN" and "WHITE" leads.
  3. Operate master switch. If window goes up and down, motor is okay, but switch is defective. If motor does not operate, check connections and leads to motor. If motor operates, switch is defective.
scientia non olet · About LEMON Manuals