Hydraulic System Bleeding
Fill clutch master cylinder with clean hydraulic brake fluid. Pump clutch pedal four or five times, and hold pedal at bottom of last stroke. Open bleeder screw on slave cylinder 1/2 turn until fluid and air stop flowing from screw. Close bleeder, then release pedal. Repeat procedure until all air is removed from system.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. |
|---|---|
| Clutch Cover-to-Flywheel Bolts | 40 |
| Clutch Housing-to-Engine Block Bolt | 35-45 |
| Clutch Release Fork Pivot Bolt | 35 |
| Transmission-to-Clutch Housing Bolt | 55 |