DTC P1A06-05: Vehicle Mode Signal - System programing failure: Action
NOTE:
To validate the repair use the Jaguar Land Rover approved diagnostic equipment to perform a DTC clear followed by a DTC read. If the repair is successful this DTC will no longer be set within the body control module
- Firstly contact Jaguar Land Rover Technical Assistance (TA), then using the Jaguar Land Rover approved diagnostic equipment, perform the diagnostic routine Set Test/Demo Modes (Routine ID 0x2235) with start parameter value 0x00 and retest. This diagnostic routine will not be available without contacting Jaguar Land Rover TA