B108C-23 Start Button Circuit B - Signal stuck low: Action
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This DTC may be induced by the driver operating the ignition switch for longer than 30 seconds.
- Check the operation of the ignition switch. Install a new ignition switch as necessary
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the ignition switch signal 2 circuit for short circuit to ground. Repair the wiring harness or install a new ignition switch as necessary