DTC P0D56-13: Proximity Detection Circuit - Circuit open: Action

WARNING: This page is about a different car, the 2023 Jaguar F-Pace and 2022 Jaguar F-Pace. However, it is still accessible from the selected car via links, so may be relevant.

Do not replace the Battery Charger Control Module (BCCM) for this DTC alone
- Inspect the charging port for water ingress and damage to the electrical contacts
- Refer to the electrical circuit diagrams and check the charging port proximity sensor circuit for short circuit to ground. Repair the wiring harness as necessary. Using the JLR approved diagnostic equipment, run application - ECU Diagnostics/Battery Charger Control Module (BCCM)/Clear Diagnostic Trouble Code(s).
- Attempt to charge the vehicle with a known working Electric Vehicle Supply Equipment EVSE
- If the fault persists, raise a TA :
- Attach the Pathfinder session file using 'Pathfinder Sessions'
- Use the DTC as a reference number in the Customer Comments field
- Describe primary and secondary diagnostics completed