DTC U0452-64: Invalid Data Received From Restraints Control Module - Signal plausibility failure: Action
- Vehicle Conditions to enable DTC Logging Strategy
- Prioritised checks to perform
- DTC is combined with DTCs U0080-87 and B10A2-32
- Refer to the electrical circuit diagrams and check the restraints control module power and ground circuits for open circuit, high resistance. Repair the wiring harness as necessary
- Refer to the electrical circuit diagrams and check the communication bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
- DTC is combined with DTC B10A2-32 or on its own
- Refer to the electrical circuit diagrams and check the crash signal circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
- DTC is combined with DTCs U0087-87, B10A2-32, U0405-84 and B1142-62 in the gear shift control module
- Refer to the electrical circuit diagrams and check the I_S_T15 ignition sense circuit for short circuit to power