C1A06-64 Right Rear Height Sensor - Signal plausibility failure: Action

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If a new height sensor is installed or the height sensor fixings were loose or slackened, the following routine must be performed using the Jaguar Land Rover approved diagnostic equipment: Calibrate Ride Height.

Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the rear right height sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness or install a new rear right height sensor as necessary
Using the Jaguar Land Rover approved diagnostic equipment, check the chassis control module for related DTCs and refer to the relevant DTC index