LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> I-Pace SE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Drive Control -- I-Pace/X590 >> Drive Control >> Removal And Installation >> Jaguar Drive SWITCHPACK (G2214288) >> Installation

Jaguar Drive SWITCHPACK (G2214288): Installation

    • Install the Jaguar Drive Switchpack (JDS).
    • Install the 8 screws.
    • Connect the 2 electrical connectors.
    • Install the trim.
    • Install the 2 screws.
  3. Install the Floor console rubber mat.
    • Install the floor console upper surrounding trim.
    • Install the 2 screws.
    • Install the 2 rubber bump stops.
  5. Install the cup holder.
    • Install the armrest.
    • Install the 8 screws.
    • Install the clip.
    • Connect the 3 electrical connectors.
    • Connect the 4 electrical connectors.
    • Install the floor console rear surround trim.
  8. Connect the startup battery ground cable.

    Refer to: 12V SYSTEM DISCONNECT .

scientia non olet · About LEMON Manuals