The Pathfinder Application 'Epic-B REPLACE' Fails To Set The Resolver Calibration Offset Angle (SSM75361)
Publication date: 2021-04-15Reference number: SSM75361
THE PATHFINDER APPLICATION 'EPIC-B REPLACE' FAILS TO SET THE RESOLVER CALIBRATION OFFSET ANGLE
TECHNICAL SERVICE BULLETIN
Reference Number(s): SSM75361, Date of Issue:
May 07, 2021
| JAGUAR: | E-PACE/X540; I-PACE/X590 |
| SERVICE CATEGORY: | Diagnostic Software Hardware |
ISSUE
When attempting to complete the application "Replace ECU" for the Electric Power Inverter Converter Control Module 'B' (EPIC), PATHFINDER fails to set the 'resolver calibration offset angle'.
CAUSE
There is a fault within the application, PATHFINDER writes a 0-degree offset angle even though the correct value is entered by the technician.
PERMANENT CORRECTIVE ACTION
This concern has been resolved with the release of PATHFINDER version 328 . The manual patch will no longer be available to download and this SSM will be deleted in 7 days.