AJ20 D4 Engine Harness P3 Sensor Connection Mismatch With P3 Sensor On Engine (SSM74597)

Publication date: 2019-11-04
Reference number: SSM74597

AJ20-D4 EXHAUST GAS PRESSURE SENSOR HARNESS CONNECTION MISMATCH

TECHNICAL SERVICE BULLETIN

Reference Number(s): SSM74597, Date of Issue: December 06, 2019

JAGUAR:	E-PACE/X540; F-PACE/X761; XE/X760; XF/X260
SERVICE CATEGORY:	Electrical

ISSUE

AJ20 D4 engine harness connection mismatch with Exhaust Gas Pressure Sensor (JDE40156)

CAUSE

Supplier of Exhaust Gas Pressure Sensor discontinued the existing sensor which was aligned with engine harness. New sensor introduced has different connector requirement and pin layout due to which existing harness connector cannot be aligned with sensor.

ACTION

When the later level sensor is ordered the connection on the harness will not fit. In this instance the engine harness connection will need to be changed using 02JDE40713.

Please see WSM 303-14A > R&I Exhaust back pressure sensor