DTC C101E-22: Right Front Vertical Acceleration Sensor - Signal amplitude > maximum: Action

NOTE: The front right vertical acceleration sensor signal voltage should be 1.9V to 2.1V when the vehicle is parked on a level surface.

Park the vehicle on a level surface. Using Jaguar Land Rover approved diagnostic equipment, check datalogger signal - Front Right Vertical Acceleration Sensor Voltage (0x2009). If the signal is outside of the specified range, refer to the appropriate system wiring diagrams and check the front right vertical acceleration sensor circuit for short circuit to another circuit
Check the installation of the front right vertical acceleration sensor
Using Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, install a new front right vertical acceleration sensor