DTC B1B38-96: Right Front Inner Sensor - Component internal failure: Action
- Refer to the appropriate system wiring diagrams and check the front right inner parking aid sensor signal circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair or install a new wiring harness as necessary. Using the manufacturer approved diagnostic system, clear the DTCs, perform routine - On Demand Self Test, and read DTCs. If the fault persists, disconnect, check and reconnect the sensor connector. Using the manufacturer approved diagnostic system, clear the DTCs, perform routine - On Demand Self Test, and read DTCs. If the fault persists, swap the relevant sensor with a fault-free sensor. Using the manufacturer approved diagnostic system, clear the DTCs, perform routine - On Demand Self Test, and read DTCs. If a DTC is set for the new position of the suspect sensor, install a new sensor
- Refer to the appropriate system wiring diagrams and check the front right inner parking aid sensor ground circuit for open circuit, high resistance