DTC C2007-18: Right Motor - Circuit current below threshold: Action
- Check the integrity of the brake disc and brake pads and that the electric park brake right actuator is correctly installed
- Refer to the appropriate system wiring diagrams and check the electric park brake right actuator circuits for correct polarity and for open circuit, high resistance. Repair circuit(s) as required
- Refer to the appropriate system wiring diagrams and check the anti-lock brake system control module power and ground circuits for open circuit, high resistance. Repair circuit (s) as required
- Using the manufacturer approved diagnostic system, clear the DTCs, then apply and release the park brake and retest. If the fault persists, install a new electric park brake right actuator
- Refer to the relevant service information and test the battery and charging system