DTC C2008-18: Left Motor - Circuit current below threshold: Action
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Check the integrity of the brake disc and brake pads and that the electric park brake left actuator is correctly installed
- Refer to the appropriate System Wiring Diagram(s) and check the electric park brake left actuator circuits for correct polarity and for open circuit, high resistance. Repair circuit(s) as required
- Refer to the appropriate System Wiring Diagram(s) and check the anti-lock brake system control module power and ground circuits for open circuit, high resistance. Repair circuit(s) as required
- Using the Jaguar Land Rover Approved Diagnostic Equipment, clear the DTCs, then apply and release the park brake and retest. If the fault persists, check and install a new electric park brake left actuator as required
- Refer to the relevant section of the service information and test the battery and charging system