DTC C1A96-64: Brake Light Switch - Signal plausibility failure: Action
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After clearing the DTCs, the warning indicator(s) may not extinguish until the vehicle speed has exceeded 10mph (15kph)
- Check if the brake pedal and accelerator pedal have been pressed simultaneously. Clear the DTC and retest
- Check the brake pedal switch installation and adjustment. Rectify as required
- Refer to the appropriate System Wiring Diagram(s) and check the brake pedal switch circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair circuit as required. Clear the DTC and retest