Pinpoint Test E: Interference-Webbing Routing

1. Refer to the relevant removal and installation service information, remove any trim panels required to expose the D loop (anchor point)
2. Remove obstructions and foreign objects ensure the webbing does not catch or rub
3. Confirm the seatbelt does not contact the wiring harness
4. Check for correct operation twice 

Does the webbing move freely then retract correctly?

• Yes  : Refer to the relevant removal and installation service information, reinstall any trim panels, ensure there are no obstructions and the webbing does not catch or rub. No further action required
• No  : Go to PINPOINT TEST F .