Removal And Installation: Removal

1. WARNING: Make sure to support the vehicle with axle stands.

   Raise and support the vehicle.

2. For additional information, refer to: Battery Disconnect and Connect .
3. For additional information, refer to: Cowl Vent Screen .
4. CAUTION: Before disconnecting or removing components, ensure the area around the joint faces and connections are clean. Plug open connections to prevent contamination.

   Torque Specification: 3.5 Nm

5. Torque Specification: 4 Nm

6. CAUTION:

   • Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
   • If brake fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

   Torque Specification: 17 Nm

Torque Specification: 8 Nm

• Loosen but do not remove the 2 nuts.