Deployable Towbar Warning Indicators
| DEFINITION | AUDIBLE ALERT | LED | USER ACTION REQUIRED |
|---|---|---|---|
| Towbar deploying | Slow beep - until action complete | Slow flashing - until action complete | None - wait for action to complete |
| Towbar stowing | |||
| Towbar running recovery cycle | |||
| Towbar loaded when stow attempted Towbar obstructed |
Fast beep - 2 seconds | Fast flashing - 2 seconds | Remove load or obstruction and operate towbar to start recovery cycle |
| Inhibit not met error | Fast beep - 1 second | Fast flashing - 1 second | Ensure vehicle not in gear and not moving, and tailgate is open before operating towbar |
| User requested stop | Fast beep - 1 second | Fast flashing - 1 second | When towbar action is to be restarted, operate towbar to start recovery cycle |
| Towbar not locked | Fast beep - 10 seconds | Rapid flashing - as long as vehicle systems are operating | Do not tow with towbar in this state. Operate towbar to start recovery cycle |
| Towbar fault | Fast beep - 5 seconds | Rapid flashing - as long as vehicle systems are operating | Do not tow with towbar in this state |
| Recovery cycle failed | Fast beep - 2 seconds | Rapid flashing - as long as vehicle systems are operating | Do not tow with towbar in this state |
| Deploy complete | None | ON - as long as vehicle systems are operating | |
| Recovery complete | |||
| Stow complete | None | ON - 2 Seconds |
The trailer socket is supplied with a permanent fused power supply from the RJB. The RJB also supplies a power supply when the ignition is on (power mode 6) for trailer battery charging and other trailer ancillary components.