LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace First Edition >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control - F-Pace >> Speed Control >> Speed Control Switch >> Removal And Installation >> Installation

Removal And Installation: Installation

    1. Install the speed control switch.
      • Install the retaining screw.
      • Connect the electrical connector.
  2. NOTE: Make sure that the harness is routed to the position noted on removal.
    • Connect the electrical connector.
    • Install the paddle shifter.
    • Install the retaining screw.
  3. Install the driver airbag.

    Refer to: Driver Airbag Module

  4. Connect the startup battery ground cable.

    Refer to: Battery Disconnect And Connect

    2018.0 F-PACE (X761), 310-03 

    SPEED CONTROL 

scientia non olet · About LEMON Manuals