DTC B1000-1A: Right Hood Hinge Deployment Control - Circuit resistance below threshold: Action
WARNING:
The vehicle must not be driven if the hood has been deployed.
NOTE:
Repairs due to a collision are not warrantable.
- Check the vehicle for collision damage. Repair as necessary. Install a new right hood latch release deployment control
- Refer to the appropriate electrical circuit wiring diagrams and check the right hood latch release deployment control circuit for short circuit between power and ground. Install a new wiring harness as necessary. If no wiring harness fault exists, using the manufacturer approved diagnostic system, clear the DTCs and retest. If the fault persists, install a new right hood latch release deployment control