DTC B11DB-87: Battery Monitoring Module - Missing message: Action
- Clear DTC and retest. If additional DTC B108783 is logged, check and install new rear junction box as required
- If additional DTC B108783 is NOT logged, check for good/clean contact at battery monitoring system control module connector, refer to applicable SYSTEM WIRING DIAGRAM(S) and check LIN network circuit between the battery monitoring system control module and rear junction box. Repair wiring harness as required. Clear DTC and retest
- Refer to applicable SYSTEM WIRING DIAGRAM(S) and check battery monitoring system control module to battery positive monitor circuit for open circuit, high resistance. Repair wiring harness as required. Clear DTC and retest
- If DTC remains, check and install new battery monitoring system control module as required