Diagnostic Trouble Code (DTC) Index DTC: Integrated Control Panel -- F-Type/X152

• Diagnostic Trouble Code (DTC) Index DTC: Integrated Control Panel
  • Description And Operation
    • Integrated Control Panel (ICP)
      • Notes
      • B101F-14: Eject Switch -Circuit short to ground or open
        • Possible Causes
        • Action
      • B101F-24: Eject Switch -Signal stuck high
        • Possible Causes
        • Action
      • B1022-03: Audio On/Off Switch - FM (Frequency Modulated)/PWM (Pulse Width Modulated) Failures
        • Possible Causes
        • Action
      • B1022-14: Audio On/Off Switch -Circuit short to ground or open
        • Possible Causes
        • Action
      • B1022-24: Audio On/Off Switch - Signal stuck high
        • Possible Causes
        • Action
      • U0055-82: Vehicle communication bus D - Alive/sequence counter incorrect/not updated
        • Possible Causes
        • Action
      • U0055-87: Vehicle communication bus D -Missing message
        • Possible Causes
        • Action
      • U0055-88: Vehicle communication bus D - Bus off
        • Possible Causes
        • Action
      • U0300-00: Internal Control Module Software Incompatibility - No sub type information
        • Possible Causes
        • Action
      • U1A00-87: Private communication network -Missing message
        • Possible Causes
        • Action
      • U1A00-88: Private communication network - Bus off
        • Possible Causes
        • Action
      • U2002-24: Switch - Signal stuck high
        • Possible Causes
        • Action
      • U2010-98: Switch Illumination -Component or system over temperature
        • Possible Causes
        • Action
      • U2105-03: Switch Pack Signal "A" - FM (Frequency Modulated)/PWM (Pulse Width Modulated) Failures
        • Possible Causes
        • Action
      • U2105-11: Switch Pack Signal "A" -Circuit short to ground
        • Possible Causes
        • Action
      • U2105-13: Switch Pack Signal "A" -Circuit open
        • Possible Causes
        • Action
      • U2105-29: Switch Pack Signal "A" -Signal invalid
        • Possible Causes
        • Action
      • U2105-2A: Switch Pack Signal "A" -Signal stuck in range
        • Possible Causes
        • Action
      • U2105-4A: Switch Pack Signal "A" -Incorrect component installed
        • Possible Causes
        • Action
      • U2105-54: Switch Pack Signal "A" -Missing calibration
        • Possible Causes
        • Action
      • U2106-11: Switch Pack Signal "B" -Circuit short to ground
        • Possible Causes
        • Action
      • U2106-13: Switch Pack Signal "B" -Circuit open
        • Possible Causes
        • Action
      • U2106-29: Switch Pack Signal "B" -Signal invalid
        • Possible Causes
        • Action
      • U2106-2A: Switch Pack Signal "B" -Signal stuck in range
        • Possible Causes
        • Action
      • U2106-4A: Switch Pack Signal "B" -Incorrect component installed
        • Possible Causes
        • Action
      • U2106-54: Switch Pack Signal "B" - Missing calibration
        • Possible Causes
        • Action
      • U2300-54: Central configuration -Missing calibration
        • Possible Causes
        • Action
      • U2300-55: Central configuration -Not configured
        • Possible Causes
        • Action
      • U2300-56: Central Configuration -Invalid/incomplete configuration
        • Possible Causes
        • Action
      • U3000-41: Control Module - General checksum failure
        • Possible Causes
        • Action
      • U3000-96: Control Module - Component internal failure
        • Possible Causes
        • Action
      • U3003-62: Battery Voltage -Signal compare failure
        • Possible Causes
        • Action