P0236-24: Turbocharger/Supercharger Boost Sensor A Circuit Range/Performance - Signal stuck high: Action
- Refer to the applicable SYSTEM WIRING DIAGRAM(S) and check manifold absolute pressure sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Using the manufacturer approved diagnostic system check throttle position voltage at ignition on
- Check intake manifold for leakage, loose or missing components
- Check air filter for blockage or restriction
- Check engine breather system for leakage
- Check throttle blade for carbon obstruction
- Check and install a new manifold absolute pressure sensor as required
- Check catalytic converter for damage
- Check exhaust system for blockage
- Using the manufacturer approved diagnostic system clear all stored DTCs using the `Diagnosis Menu' tab and retest