P0011-71: Intake (A) Camshaft Position Timing - Over-Advanced (Bank 1) - Actuator stuck: Action
- Check the oil level is correct
- Check variable camshaft timing solenoid circuit intake and exhaust connectors are not swapped
- Refer to the applicable SYSTEM WIRING DIAGRAM(S) and check variable camshaft timing solenoid circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Refer to the relevant service information and check the oil pressure is within specification. Check oil supply to camshaft is correct and that oil gallery is free from debris
- Using the manufacturer approved diagnostic system clear all stored DTCs using the `Diagnosis Menu' tab and retest
- Check and install a new variable camshaft timing actuator as required
- Refer to the relevant service information and check the camshaft operation