DTC B10A4-71: Right Headlamp Swivel Actuator - Actuator stuck: Action
- Turn the Headlamp Switch on, cycle the ignition state to start the engine, look for any errors in the Headlamp Beam movement (compare with other headlamp) and visually inspect the lamp for internal damage or dislocation (ball joints out). If no faults are evident refer to the appropriate electrical circuit wiring diagrams and check for circuit fault between the Headlamp Power Module and the Swivelling Feedback Actuator. If no mechanical or circuit faults are evident suspect headlamp internal fault, replace as required. Refer to the new module/component installation note at the top of the DTC Index