LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XF Base >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column -- XF/X250 >> Diagnosis And Testing >> Steering Column >> Component Tests >> Pinpoint Test >> Pinpoint Test B: Steering System Noise - Final Checks

Pinpoint Test B: Steering System Noise - Final Checks

  1. B1: AFTER COMPLETING THE ACTIONS ABOVE, CHECK AGAIN FOR POWER STEERING SYSTEM NOISE USING THE FOLLOWING PROCEDURES 
    1. Start the engine and turn the steering wheel fully (lock to lock) 3 times. Check for power steering noise during this procedure
    2. Test drive the vehicle and check for power steering noise
    3. Check the temperature of the power steering fluid. Once the power steering temperature exceeds 80 degrees Celsius, repeat steps  1 and  2 above.

    Is there still noise emanating from the steering system?

    • Yes  : Repeat the diagnostic steps above, or check other vehicle systems for the source of the noise
    • No  : No further action
scientia non olet · About LEMON Manuals