DTC U200D-14: Control Module Output Power A - Circuit short to ground or open: Action
- Refer to the applicable SYSTEM WIRING DIAGRAM(S) and check the steering angle sensor ground circuit for open circuit, high resistance
- Refer to the applicable SYSTEM WIRING DIAGRAM(S) and check the brake vacuum sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance (3.0L N/A petrol engine only)
- Using the manufacturer approved diagnostic system, check the anti-lock brake system control module for steering angle sensor related DTCs and perform the relevant corrective actions
- Using the manufacturer approved diagnostic system, clear the DTCs and retest. If the fault persists, install a new anti-lock brake system control module